This button is inactive unless you select the image -> PICT file HotKey.

Select a default application to use when you open a PICT file saved by Flash-It.

This button is inactive unless you select a HotKey which already has a key assignment first.

Deassign the key assignment from the selected HotKey.

This button is inactive unless you select a HotKey in the list above first.

Assign a new key assignment to the selected HotKey.

HotKey to modify a few of the Flash-It options without going through the control panel.

HotKey to send an existing image in the clipboard to the destination that you specify.

HotKey to capture a screen-region, then send the image to the destination that you specify a second later.

HotKey to capture a screen-region and print it.

HotKey to capture a screen-region and save the image to a PICT-based disk file.

HotKey to capture a screen-region and save the image to the scrapbook file.

HotKey to capture a screen-region and save the image to the clipboard.

When this box is un-checked, you have to manually select the screen-capture region whenever you use a capture HotKey.

Currently Flash-It is respecting the screen-capture region which has been previously used.  To turn this off, uncheck this box.

Currently Flash-It is not using a default folder to save PICT files.  To switch, click on the check box on the left.

The current default folder to save PICT files with Flash-It is shown here.  To modify, click here and select a new folder with the file-open dialog.

Flash-It will not try to use a default folder, when saving a captured image to a PICT-based disk file.

When saving a captured image to a PICT-based disk file, always try first to use a default folder.

Select the notification sound to use when Flash-It lets you know of a successful screen-capturing. You may also choose to invert the captured screen area without using a sound.

When caps-lock key is down, capture the front-most window.  If a standard menu is pulled-down, then, capture only the displayed menu.

When caps-lock key is down, capture the entire screen of the monitor where the cursor is located.

Use Lasso tool for selecting the screen capture region, i.e., a free-hand selection.

Use Marquee tool for selecting the screen capture region, i.e., a rectangular selection.

Click here to change the scaling factor to shrink the captured image.

Click here to change the scaling factor to magnify the captured image.

The cursor/pointer image will not be captured. Check here if you wish to capture it, also.

The cursor/pointer image will be captured. Uncheck here, if you do not wish to capture it.

When this box is checked, Flash-It shows a start-up icon on the desktop during the reboot process.

Flash-It HotKeys are inactive now. To activate them check here.

When this box is checked, Flash-It HotKeys are active.

Use this popup menu to toggle between two pages available for this Flash-It control panel.

Display the help window which gives a basically the same info as what is available from this balloon help.

Flash-It control panel
Shareware (U.S. $15)
Contact the author at
Nobu Toge
2425B Channing Way, Suite #314
Berkeley, CA 94704-2209